Before cleanup
- Have people and pets leave the room.
- Air out the room for 5-10 minutes by opening a window or door to the outdoor environment.
- Shut off the central forced air heating/air-conditioning system, if you have one.
- Collect materials needed to clean up broken bulb:
- stiff paper or cardboard;
- sticky tape;
- damp paper towels or disposable wet wipes (for hard surfaces); and
- a glass jar with a metal lid or a sealable plastic bag.
During cleanup
- Be thorough in collecting broken glass and visible powder.
- Place cleanup materials in a sealable container.
After cleanup
- Promptly place all bulb debris and cleanup materials outdoors in a trash container or protected area until materials can be disposed of properly. Avoid leaving any bulb fragments or cleanup materials indoors.
- If practical, continue to air out the room where the bulb was broken and leave the heating/air conditioning system shut off for several hours.
Actions You Can Take to Prevent Broken Compact Fluorescent Light Bulbs
- Always switch off and allow a working CFL bulb to cool before handling.
- Always handle CFL bulbs carefully to avoid breakage.
- If possible, screw/unscrew the CFL by holding the plastic or ceramic base, not the glass tubing.
- Gently screw in the CFL until snug. Do not over-tighten.
- Never forcefully twist the glass tubing.
- Do not install CFLs in table lamps and floor lamps that can be easily knocked over, in unprotected light fixtures, or in lamps that are incompatible with the spiral or folded shape of many CFLs.
- Do not use CFL bulbs in locations where they can easily be broken, such as play spaces.
- Use CFL bulbs that have a glass or plastic cover over the spiral or folded glass tube, if available. These types of bulbs look more like incandescent bulbs and may be more durable if dropped.
- Consider using a drop cloth (e.g., plastic sheet or beach towel) when changing a fluorescent light bulb in case a breakage should occur. The drop cloth will help prevent mercury contamination of nearby surfaces and can be bundled with the bulb debris for disposal.
(NaturalNews) Compact fluorescent light (CFL) bulbs have become all the rage over the past several years, touted by many as the preferable "green" way to light a home, save energy, and promote environmental responsibility. While they may use less energy than traditional incandescent bulbs, CFL bulbs are filled with toxic mercury that, when disposed of, contaminates landfills and the environment.
A report released in 2008 from the Maine Department of Environmental Protection revealed that when a CFL bulb is broken, it can release dangerously high levels of mercury into the air. Mercury-vapor standards generally allow for 300 nanograms of mercury per cubic meter of air, however a broken CFL bulb can emit upwards of 50,000 nanograms per cubic meter, or more than 166 times the safe upper threshold.
In Toronto, city officials require people to dispose of CFL bulbs at special hazardous waste facilities because they don't want the city's landfills to become contaminated with mercury. While used CFL bulbs are not legally recognized as hazardous waste, they are treated as such because they pose serious environmental threats when broken and released into the environment.
Waste runoff and ground seepage from landfills can contaminate rivers, streams, lakes, reservoirs, and underground water tables. Even though landfills are generally designed to minimize this kind of contamination, the rapidly growing usage of CFL bulbs could have disastrous environmental consequences if they are not disposed of properly.
CFL bulbs also emit high levels of radiation, causing migraine headaches, sleep abnormalities, fatigue, and other health problems. Unlike traditional incandescent bulbs, CFL bulbs emit excessive "dirty energy," or electromagnetic frequencies (EMFs), a fact that has received little attention from those on the mainstream "green" bandwagon who continue to endorse CFLs as the solution to the alleged climate change crisis.
The voltage reduction technology in CFL bulbs causes high amounts of EMF pollution to be emitted. Similar to the kind released from mobile phone antennas and food irradiation machinery, EMF radiation poses serious health threats to humans who are exposed to excessive amounts of it. CFL bulbs have been found to greatly increase EMF exposure as they are often the most significant EMF polluters in homes that use them.
Light-emitting diode (LED) bulbs, on the other hand, are a much safer alternative to CFL bulbs. Those who wish to transition from traditional incandescent bulbs to something that uses less energy would do well to investigate LED alternatives. Although they are typically more expensive than the other technologies due to limited acceptance in the mainstream, they are better for the environment than CFLs and emit far less EMF pollution.
CFLs in the landfill
- 98% of CFL bulbs end up in landfills, instead of being recycled
- This causes 28,000 pounds of mercury from the bulbs to end up in the landfills
- 1/20 of a teaspoon of mercury can contaminate 25 acres of water
- Proposal that would add an extra $5 to the cost of bulbs, and would get their money back if they drop them off at a recycling center
BUT HEY YOUR SAVING A LITTLE MONEY RIGHT!!!!
The last major GE factory making ordinary incandescent light bulbs in the United States is closing this month, marking a small, sad exit for a product and company that can trace their roots to Thomas Alva Edison's innovations in the 1870s. that's right more Jobs overseas thank you all for buying more Chinese products!!!!
